Track Creating Problems
Posted Jan 26 2020 - 06:25 PM
Posted Jan 26 2020 - 06:29 PM
Can you maybe post some images to clarify your issue?
Posted Jan 26 2020 - 06:36 PM
yes, next time i'll take the picture, i hung up when i was at the height of happiness.
but this is my goal, i will spend some time on this adventure, we don't have many clues from Brazil, and i wanted to see some old ones that no longer exist.
Of course, we have to highlight and thank the work of "Pablo Fernandez" in Interlagos !!!
Posted Jan 27 2020 - 11:03 PM
Hope that helps visualized the situation a bit.
Posted Jan 28 2020 - 06:17 AM
Posted Jan 28 2020 - 07:39 AM
Fiorano was really your first try to create a track?!
Wow! That's why you are still creating brilliant tracks and I didn't even manage to create an Oval.
Posted Jan 28 2020 - 06:51 PM
the correct would be 1km
Edited by jonny'o, Jan 28 2020 - 06:53 PM.
Posted Jan 28 2020 - 07:50 PM
Edited by Michkov, Jan 28 2020 - 08:02 PM.
Posted Jan 29 2020 - 06:57 AM
the correct would be 1km
You need to adjust all the mismatches though before to change the scale.
I can see from your screen shot that you started horizontal and arrived a little downhill
To correct the orientation mismatch, you copy/paste the mismatch for the section 0 to the calculator and divide it by 2
then add that to the curvature of the last curved (or some other that you prefer) section of your track.
Once you done that, you will need to zero all the mismatches from there up to the last section.
Posted Jan 30 2020 - 01:43 AM
It's not that hard, zero all the gaps along the track up to the last corner and adjust that to fit the final straight piece to the start. Bit trial by error but when it comes to lateral offset but orientation is one calculation.
For scaling you just multiply the relevant parameters by 1000/2114.6589 or ~0.47. So if the straight is 500m long now the right length would be about 235m. For corners the parameter should be the radius. I suggest a spreadsheet for that, oh and you'll have to degap the whole track again afterwards again.
Edited by Michkov, Jan 30 2020 - 01:44 AM.
Posted Jan 30 2020 - 01:35 PM
I thought the total length could be changed only in gtkmaker :/
Thanks . Marcos
Posted Feb 02 2020 - 08:08 AM
Edited by jonny'o, Feb 02 2020 - 08:11 AM.
Posted Feb 02 2020 - 09:57 AM
Posted Feb 03 2020 - 08:12 AM
Then it seems that the compiler is not in the same folder of the build files you created; you need to have all the build files in the same folder together with the 3DO that you add to the TSO file; this way the compiler will not complain and will produce a [track].3DO
For the picture you posted about the gaps being still there; you should check the section 0 for the eventual 'real gap'; 1gpl unit is not a problem (a few really) while you are working on the track.
As Michkov said, you will need to remember and 0 all the positive gaps and all the orientation mismathces before the release though.
Posted Feb 03 2020 - 09:06 AM
if i used gtkmaker to make the track, does that mean that only the last section needs to fix? or all sections yet?
Posted Feb 03 2020 - 02:08 PM
The gaps that the 2 have show up into the first section but to fix them you need to change the several sections that are on the last part of the track (usually from the beginning of the last corner up to the finish line).
Hope now is a little more clear than my previous sentence; sorry for that...
Posted Feb 03 2020 - 05:13 PM
Some links to the trk23doZ I found are broken.
Edited by jonny'o, Feb 03 2020 - 05:17 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users