Learning All Over Again...
Posted Jun 11 2017 - 03:20 PM
In my introductory post, the topic quickly transitioned into a "how do I?" thread, so the suggestion was made to use a more appropriate forum... so here I is! The original thread can be viewed here for an overview of what has been discussed thus far:
I most certainly welcome any input you GPL veterans can offer as I attempt to get back up to speed (pardon the pun!) with GPL!
Posted Jun 11 2017 - 04:16 PM
Okay, here's the installer that I have downloaded:
And here's the GEM that I have downloaded:
IF the above is what I need, then I think I now need to do the following:
* Uninstall my wonky GPL Win7 install.
* Install gplinstall_beta_1.08.exe
* Insert the CD and DO NOT run the default installation routine.
* Start gplinstall_beta_1.08.exe and let it do its thing.
* Once I verify that I have a good installation of GPL, install GEM.
Does this look correct?
Posted Jun 11 2017 - 04:50 PM
Then you should have gpl exe's on your desktop.Execute either one and enter the gpl menu.Name your driver and pick car ,helmet colour and nationality.Note when you click for name you wont see cursor to type in name box.Don't worry just type name and letters will type.
Then calibrate controller and other settings.
Come out of gpl back to desktop,install gem,it may ask you to point at gpl exe in your game dir folder.Once you do gem should work with gpl.
Most people start gpl from the desktop exe's rather than gem.They use gem for mods and more setting options.
Edited by twinpotter, Jun 11 2017 - 05:07 PM.
Posted Jun 11 2017 - 05:10 PM
Making sure I understand you:
* Install gplinstall_beta_1.08.exe
From there, GPL is installed and it's time to go into GPL and make my car/country/etc selections.
GEM can then be installed afterward. (But will be needed for the1955 mod.)
Posted Jun 11 2017 - 05:40 PM
I install mods into my gpl folder.
Some people copy the base gpl folder and install mods into that copied gpl folder.So they have numerous folders for each mod.
After your base 1.08 install it is a good idea to save that base dir to one of your external HD as sometimes gpl can break sometimes.
For each mod you can have a different driver name.Just make a driver name for each mod just like you did for the base 1.08 install.Then in gem you will have a driver name drop down box for each driver name.Change the driver name in gem and the mod config will change so you can alter things for that mod.
Or you can just have one base folder,install all mods into that and under one driver name.But remember save a copy of your base 1.08 install as a starting point.
You can try gpl when installed with installer and while first going in to create driver,without installing Gem.
Edited by twinpotter, Jun 11 2017 - 05:44 PM.
Posted Jun 11 2017 - 05:49 PM
Good news: GPL is now installed and runs.
Bad news: There's a smallish pink circle right above the six o' clock position on all menu pages within GPL. This same pink circle is translucent when in a car.
Posted Jun 11 2017 - 05:55 PM
What graphics card are you running.
Also make sure you have either direct3d v2 or opengl v2 rasterizers picked.Either in gpl graphic options or you can do it in Gem,if installed.
Someone may come along here and have some solution to your issue.
Posted Jun 11 2017 - 06:16 PM
Please install GEM+ and start GPL. Here you can control some nice patches too...
Posted Jun 11 2017 - 06:35 PM
Anyway, in GPL, the Glide V2 was selected, so I changed that to direct3D and the pink circle went away. Selecting either of the Glide options returns the pink circle. Very strange.
However, in direct3, even with all sliders maxed and a resolution of 1900 x 1600, I get 36 FPS with a full field of cars ahead.
I'm okay with the direct3D option. Time to install GEM, and then get 1955 installed!
tp: Forgot to tell you that I have GeForce GTX 650 graphic card.
Posted Jun 11 2017 - 07:29 PM
The instructions at the gplworld.de indicate I'm to use GEM to create the 1955 exe. After looking within GEM to see if I could accomplish that, I still haven't a clue how to do that. Have futzed with this all evening and am tired of dealing with it.
All for tonight. I will resume tomorrow night.
Thanks for you input. It is appreciated.
Edited by Old Simmer, Jun 11 2017 - 07:30 PM.
Posted Jun 11 2017 - 08:22 PM
Posted Jun 11 2017 - 09:44 PM
Bob: Thanks. That must have done the trick, for now the 1955 exe was active within my GPL folder. I have created a shortcut for it and placed it up on the Desktop along with the 1.2 and 1.3 shortcuts. I only have three track showing up within the 1955 in-game track menu, (Buenos Aires, Zandvoort, and The Ring), so I still have much to learn. I tried to make a copy of the functional Monza10k track that is in my old GP install (from my E drive), but it doesn't show up. That tells me I need to do something else in order for the 55 mod to "see" it
Posted Jun 12 2017 - 05:38 AM
From what I have read you are already using my easy installation guide:
After installing GEM+ and creating a GPL player for the 55 mod (and all other mods) via the GPL shortcut 1.3 you only need to install all tracks for the 55 mod, then you install the 55 mod itself. But you can also install the missing tracks later.
Here you can download full track folders for the 55 mod (55 track conversions & updates): http://srmz.net/inde...p?showforum=189
I wouldn`t use the tracks of your old installation (I assume those are located on your E drive).
You don`t need to create a shortcut to the 55mod.exe when you have all mods in one GPL installation (having a new GPL installation for each mod is a different thing I would only recommend for experienced users). When you are done with all installations you start GPL only via the green "GPL" button of GEM+ (maybe I should make that more clear in my guide).
I hope that helps you.
Please keep on asking in case you run into trouble again.
I am sure we will be able to fix it and get it running.
Edited by Stefan Roess, Jun 12 2017 - 09:54 AM.
Posted Jun 12 2017 - 05:09 PM
At this point,I have the following tracks functioning in the 55 Mod:
I think Zandvoort is the default GPL track.
Having a blast crashing my brains out at Spa currently! Man, those guys back then had brass balls: Spa is scary fast and had minimal safety features!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users