Bugs In My GplA/Rbar bugs; esc +return bugs
Posted Oct 30 2019 - 06:31 AM
I am now running an HP 8000 elite with Core Duo Intel processor 3.4Ghz + 8Gb ram. with Intel graphics plus the Intel graphics media accelerator.
I have a Logitech Driving Force Pro wheel and pedals.
I have loaded both early and v1.3 beta versions of GPL.
The graphics has been set to OpenGL V2setup,( having tried the directX and found it wanting).
Frame rate in both versions is 36. I run in 1280x1024 on an HPL1710 screen.
I start with V1.3.
I set the antirollbars to 0lbf/in,
I save the settings.
The min rate reverts to 40lbf/in!!!
After checking my actions etc I have concluded there is a bug.
When I run the original version, downloaded at the same time as v1.3, I can set the antiroll bar to 0lbf/in and the setting is saved. This is how it should be.
If I wish to change the set-up after stopping on the circuit (Nurburgring) and press Esc followed by Return, the screen blacks out leaving the only the cursor visible.
This problem is intermittent, and seems to be influenced by motion of the car.
I have to Ctrl Alt Del to return to normality, when I find the resolution to be 640x480 or similar. It gives a message saying that the resolution is incorrectly set . I check using the Intel button on the notification bar, but all is OK!
At the moment I find the original version more to my liking than V1.3.
Nevertheless, it's great to be able run GPL again, and thanks to all you software wizards who have made it possible.
Posted Oct 30 2019 - 09:01 AM
You started with W98SE but what OS is it now?
IMO you should install GPL with the installer 1.08 if that isn't V1,3.
Posted Oct 30 2019 - 12:27 PM
Have you done a fresh Installation of GPL or did you update your old one (in case you had an old backup)?
Maybe this is of help?
Grand Prix Legends (GPL)
Easy Installation Guide
Edited by Stefan Roess, Oct 30 2019 - 04:39 PM.
Posted Oct 31 2019 - 10:53 AM
I'll start at the top.
My HP Intel Core Duo ( two processors show on taskmanager performance screen)
has Win 7 Pro 64bit loaded. It does run 32bit software.
I downloaded gplinstall_beta_1.08.exe and gplworld easy installation guide.pdf.
By default I must have run the exe file - I now have v184.108.40.206 and V1.3.
My main problem at this moment is the Papyrus window keeps crashing.
I have the graphics on OpenGL V2.
Graphics : Intel® Q45/Q43 Express Chipset 4.5 Gaming graphics : 1695 MB Total available graphics memory 3.6
The figures at the rhs are the scores out of 7.9 for performance.
When I ran GPL on a Win98SE computer, it had a Voodoo 3 or 5 neither of which had anything like the memory the Intel board above.
I have tried isolating the computer from my home network, and disabling any likely components of Kaspersky; I can pause Kaspersky, but it continues to look for updates. Neither of these actions has any effect.
When I installed GPL I followed the instructions. I assume all relevant patches, fixes etc are loaded.
The last weirdo occurred this afternoon. I have a Logitech Force Pro from way back, with buttons paddleshifts and standard gear lever.
Guess what - GPL decided it didn't like the gearlever anymore and refused to recognise it. I checked it in the device panel of Win 7 and all the lights work when the buttons/paddles/gearlever etc are operated.
The minor issue with the minimum antiroll bar settings - depends which option I select in training .
I can select 0lbf/in for the novice car but not for the grand prix car which won't drop below 40lbf/in
Looks like a reload, unless you guys have any other suggestions?
Edited by quattr020V, Oct 31 2019 - 10:58 AM.
Posted Oct 31 2019 - 11:33 AM
Did you delete what you had installed before using the 1.08 installer? You want to start clean with no GPL installs at all.
Posted Oct 31 2019 - 01:58 PM
I use CCleaner and UnCleaner after I uninstall games. Keeps my PC squeeky clean and buzzing along nicely. Google them and try.
Posted Oct 31 2019 - 04:44 PM
For some reason the site would not allow me to sign in using those details - Au200tq is still in the member's list.
Anyhow, I have both of the versions on the desktop.
The question moves to why the Papyrus window shuts down.
I have just re-read the installation pdf, which says that the 3D acceleration loaded , OPenGLV2 or D3Dv2, should be selected in Graphics Options.
If that is the case why is one or the other not greyed-out? I tried both, but the D3Dv2 did not work at all well, so I selected OpenGLV2 - the difference was amazing.
I will try a clean install again, and note down my choices, unless there is a log file somewhere with this data in it.
I'll keep you posted.
Posted Nov 14 2019 - 10:36 PM
Posted Feb 13 2020 - 05:01 PM
Apologies for response time to posts.
I have it all running properly now on my XP machine with 3.3GHz Pentium 2 core , and a GeForce 6200 graphics card.36 fps no problem. I am having great fun with the 1955 season setup - I'd forgotten about brake fade
Anybody planning a 1934 - 1939 season?
Regards to all.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users