Posted Apr 06 2021 - 12:00 PM
I have a Fanatec Clubsport v2.5 wheel and pedals that I recently purchased. Through browsing various forums I have managed to get decent feedback and feel for Assetto Corsa however I am struggling to get decent settings for GPL and there doesn't appear to be much advice that I can find, at least for my wheelset.
I am using the following settings in GEM+ which I found in a general post about FFB. I am using the FFBTest patch.
Force feedback latency 0.2
Force Feedback Damping 55
Force Feedback maximum force 350
In the Fanatec settings I have restricted the wheel to 540 degrees (SEN) rather than the standard 900 and in the car setup currently have the Steering ratio at 9:1
However, for GPL what should I be setting the following too in the Fanatec tuning menu. These are my current settings
thanks in advance
Posted Apr 06 2021 - 05:40 PM
Max FF: 320
Could be worth trying on a spare profile; even if you then think your own settings work better for you!
Posted Apr 07 2021 - 07:40 AM
This is what I use nowadays:
Max FF: 225 (This will make the ffb a lot stronger: higher number is less strength.)
Steering ratio: 8:1 or lower depending on track.
FFB patch: FFB3Test1
SEN: 360 (I use a square F1 rim, for round wheels 450 or 540 would be more realistic.)
DRI: -1 (will give oscalliation but makes steering feel quicker, I use -2 for heavier cars like can-am, thundercars, 1968 etc.)
FEI: 70 (make the effects smoother)
FOR: 120 (again much stronger ffb)
SPR: OFF (always OFF)
BRF: 80 (for load cell brake)
This all will make the force feedback very strong while also keeping the wheel feel lively.
It is quite an "oscallation-happy" setup but to get rid of that you can use lower drift settings or higher dampening.
Edited by Millennium, Apr 07 2021 - 07:44 AM.
Posted Apr 08 2021 - 02:27 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users