Edited by Nunya88, Jan 10 2016 - 07:51 PM.
Crashes When I Try To Go On To The Track.
Posted Jan 10 2016 - 07:48 PM
Posted Jan 11 2016 - 08:43 PM
2. Controller settings in Win and in game?
Is this only install? If you have another, (like 2013 demo), you might switch some things out by copying from there.
It could be corrupt file, (sort of doubt it)...might be since you took Nassau out GEM+ thinks it should still be there, or GEM+ never thought it was?
Edited by John Woods, Jan 11 2016 - 08:47 PM.
Posted Jan 12 2016 - 05:41 AM
Posted Jan 13 2016 - 09:06 PM
Posted Jan 13 2016 - 10:07 PM
Or, if you have CD, use the 1.07 Installer, which works very well.
Follow the instructions found here or on gpllinks.org.
No idea about Win8 issues, but seems I recall others had best luck with last version of it.
Doing a new install is no big deal.
Posted Jan 14 2016 - 03:25 PM
as for "...it CTD's when I hit the green button to enter the track, it does this either in Gem or Gpl..."
I had the same problem when I set my GPL resolution to 2560x1440 since my desktop resolution is 2560x1440. I tried all kinds of fixes but nothing worked. I can run N2K3 in 2560x1440 with no problem. The solution to ending the CTD's was to lower the GPL resolution to 1920x1200. Problem solved.
Of course it's possible the cause of your CTD's may not be associated with your resolution settings. Before I would do a reinstall I would try eliminating other possible causes.
1. You could try entering the track in training mode, if you get into the track without a CTD then I would suspect a corrupted file somewhere in the carset, excepting of course the actual car you entered the track with. You could try different cars and see if any of them works without triggering a CTD.
2. Have you opened your season.ini (located in the "seasons" folder with notepad or notepad++ (better) to confirm that the "numEvents=x (normally located four lines from the top) where x equals the last event entry at the bottom of the file? The original season ini from the original GPL is named "67season.ini". In its original state, prior to adding any additional tracks, it contained a total of 11 tracks, and if you have it then when you open it you will see "numEvents=11" at the top, and when you scroll down to the bottom you will see the last track listed is Zandvort and you will see "Event11" in brackets. In your case you added Nassau and if you added it to 67season.ini then when you open it you should find numEvents=12" at the top and the last track will be Nassau and in brackets you should see Event12. For every track added to a given season.ini, the event number will increase by 1. The number listed in "numEvents" at top of file must always match the total number of tracks listed which should match the number in "Event" associated with the last track entry. If the numbers don't match, be sure the number associated with each track was incremented by 1, ie., you should never have more than one track with the same number listed in the Event field. And if there are no duplicate Event numbers then just edit the number in the last "Event" field and/or in the "numEvent" field to match, then save as an ini file, notepad default will be to save as a text file which you don't want to do. Select "all files" and then save as 67season.ini.
3. Another thing that can cause the CTD when trying to enter the track is corrupted files in the track itself but based on the description you gave I doubt that is the cause of the problem.
4. Have you tried adjusting compatibility settings? In Win7 you can right click the gpl.exe in your GPL folder, click on the "Compatibility" tab and put a check in the "Run this program in compatibility mode for:" then select a different OS from the drop down menu. You might get lucky running GPL in Win7 or Vista or WinXP compatibility mode.
5. Lastly, have you tried right clicking on the gpl.exe and "Run as adminstrator"?
Posted Jan 14 2016 - 06:18 PM
Posted Jan 15 2016 - 10:04 AM
.ini file, select properties, and on the "General" tab you can view the date and time the file was last modified and if that does not match the date and time you last saved the file then obviously your changes weren't properly saved.
I remember several years ago I was having CTD's when clicking the green button to enter the track. At the time I didn't have the 2560x1440 resolution monitor I referenced previously and the issue was unrelated to resolution settings. After exploring many "possible" causes including confirming my season.ini file contained no "numEvent=" vs. "Event" discrepancies I suspected there could be something about the file itself that was corrupted at some level beyond what can be read with notepad. So I deleted the 67season.ini and replaced it with a brand new one which I obtained by reinstalling GPL with the original CD to a different location that I named "GPL Original" in order to clearly identify it. And, I never install anything else to the new install-no addon tracks, no new mods, nothing whatsoever. I just like having it installed so that anytime I suspect I may have a corrupted GPL file I can replace it with a brand new one with a simple copy and paste from my "GPL Original" installation into my "Sierra/GPL/... installation. The "GPL Original" installation takes up very little room on my hard drive since I don't add anything to it, but it has saved me a few times from opting for a complete reinstall. Not that there's anything wrong with doing a reinstall. For many people it's a quick and easy way to get GPL back up and running. I just happen to enjoy trying to figure out what is broken and see if I can fix it.
All discussion about files and resolution settings aside, it seems to me that when you try to enter the track and you get the CTD, your pc would need to load track data into memory. And I have no idea how much, perhaps not everything all at once, perhaps only portions at a time, I can only speculate here. But it seems to me that if the RAM memory on your pc were to be defective it might choke at this point of the increased load and trigger the CTD. Of course if you're running other sims with no problems then you can probably assume the problem lies elsewhere.
Posted Jan 15 2016 - 10:59 AM
Posted Jan 16 2016 - 03:14 PM
Edited by Nunya88, Jan 16 2016 - 03:16 PM.
Posted Jan 16 2016 - 09:56 PM
Otherwise seems lost in haystack of who knows what went wrong.
Assuming its not directly Win8 config related, re-name Sierra folder and begin simple new ground up GPL and GEM+ install, confirming it all works before going to next steps.
If that doesn't work, maybe it is Win8 related even if it worked before?
Posted Jan 17 2016 - 04:53 PM
Posted Jan 18 2016 - 06:44 PM
Sounds like trying a demo might have the same result?
Does Win8 qualify for Win10 upgrade? Something else to think about if it does. Although so far I'm still on XP.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users