Need Some Advice Installing Windows 7
Posted Nov 09 2018 - 10:13 AM
I went to my bank lately (IMPORTANT and WELL KNOWN bank here) and they are using Win7...
Posted Nov 16 2018 - 10:19 AM
[ FSX Bible here if anyone interested -> http://srmz.net/inde...showtopic=10956 ]
First and most important, buying a OEM PC. Completely not recommended by NickN. Anyway i have to stick with this and continue with the guide to get as much optimisation as i can, given our budget it wouldn't get much better.
Now i find myself discovering the "weak link" of my hardware. However, my knowledge is too basic and maybe someone could give me advise if i post more detailed specs (probably many of them unnecessary but i post them if needed):
Most of them come from CPU-Z v1.87, and HDD info from CrystalDiskInfo v6.3.0
Intel Core i5-4590 3.30 GHz
- Turbo Boost 3.70 GHz on single core high demand applications
- 4 cores, 4 threads
- Max. TDP: 84.0 W
- Technology: 22 nm
- Socket: 1150 LGA
- Core Voltage: 1.760
- Bus Speed: 100 MHz
- L1 Data Cache: 4 x 32 KB 8-way set associative, 64 B line size
- L1 Instructions Cache: 4 x 32 KB 8-way set associative, 64 B line size
- L2 Cache: 4 x 256 KB 8-way set associative, 64 B line size
- L3 Cache: 6 MB 12-way set associative, 64 B line size
MSI H81M-E33 (MS-7817) 1.0
- Chipset: Intel Haswell Rev. 06
- Southbridge: Intel H81 Rev. C2
- LPCIO: Nuvoton NCT6779
- BIOS: American Megatrends Inc. V6.7 04-21-2015
- Graphics Interface: PCI-Express, Link Width x16, Max. Supported x16
8 GB DDR3 Single Channel
- NB Frequency: 800 MHz
- DRAM Frequency: 800 MHz
- FSB:DRAM: 1:6
- CL: 11 clocks
- tRCD: 11 clocks
- tRP: 11 clocks
- tRAS: 28 clocks
- tRFC: 208 clocks
- CR: 1T
** Slot #1
- Module Size: 8192 MB
- Max. Bandwidth: PC3-12800 (800 MHz)
- Manufacturer: Samsung
** Timings Table:
Parameter -- JEDEC #3 -- JEDEC #4 -- JEDEC #5 -- JEDEC #6 -- Unit
Frequency -- 609 -- 685 -- 761 -- 800 -- MHz
CAS# Latency -- 8.0 -- 9.0 -- 10.0 -- 11.0
RAS# to CAS# -- 8 -- 9 -- 10 -- 11
RAS# Precharge -- 8 -- 9 -- 10 -- 11
tRAS -- 22 -- 24 -- 27 -- 28
tRC -- 30 -- 33 -- 37 -- 39
Voltage -- 1.50 -- 1.50 -- 1.50 -- 1.50 -- V
NVIDIA GeForce GTX 1050
- Memory: 2 GB GDDR5
- Graphics clock: 1354 MHz
- Processor clock: 1455 MHz
** Adapter info from Windows
- Total available memory: 5860 MB
- Memory dedicated to video: 2048 MB
- System video memory: 0 MB
- Memeory shared with the system: 3812 MB
- 2 SATA
- 12 cm
- Input (AC): 220 V 5 A 50-60 Hz
- Max Output (DC):
+3.3 V 20 A
+12 V 25 A
-12 V 0.5 A
+5 V 25 A
+5 Vsb 2.5 A
Searched for it and it seems it's no quality product (as i feared), too cheap in my opinion.
Seagate 3 TB
- Interface: SATA
- Transfer Mode: SATA/300 | SATA/600
- Standard: ATA8-ACS | ATA8-ACS version 4
- Rotation Rate: 7200 rpm
- Features: S.M.A.R.T., NCQ
S.M.A.R.T. values throw no problems, no errors, no sectors reallocation, no G-Sense errors, cool temperature.
So the weak points are:
- Low quality PSU
- Mechanical storage (already suggested to shift to an SSD)
- Too high timing and too low speed on the memory? Maybe should it be a 1600 MHz 6-6-6 to get balance?
- Not a good CPU-MB-GPU matching?
What do you think about the last 2?
Specs without having into account the SPU, Network Card and the Optical Unit, as the ones provided will do the job for now.
Will work on the case now, the air flow seems quite good but i will move all the wires because some of them are a bit messy.
Edited by TurboMan, Nov 16 2018 - 10:30 AM.
Posted Nov 16 2018 - 10:45 AM
The RAM is very slow but can easily pushed by adding a same cheap 8GB piece to get it run in "dual mode"
CPU-MB-GPU matching is fine, only braked atm by slow single mode RAM.
Posted Nov 16 2018 - 11:05 AM
Wouldn't it be better purchasing a quality 8 GB instead?
I'm starting to consider a small invesment and delay my cockpit building.
Would it make a big difference to change the PSU to an EVGA 80+ 500W, for example.
Posted Nov 16 2018 - 11:17 AM
The PSU is very cheap (11€ ) but as long as it works and you do not exceed the 500Watts I would try it.
Most important is to not let it be connected to the electricity when not used, pull the plug! Or use a switched multiple plug device.
Edited by Cookie, Nov 16 2018 - 11:21 AM.
Posted Nov 16 2018 - 11:31 AM
You have cleared some doubts i had, thanks
Posted Nov 16 2018 - 12:09 PM
Need to learn about DDR3 speed, not very clear on my mind :s
Posted Nov 16 2018 - 12:48 PM
There is a sticker on it with some letters, search for this ID, it is a mass built RAM for business PCs, slow timed for maximum stability
You can use HWinfo64 to get the name:
Posted Nov 17 2018 - 12:44 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users