so the other day I got a friend of mine into the idea of trying out GPL and as he liked it, we got to work. Having sorted out some things, we got the game up and running for him, yet one issue is left:
The resolution is set to 1920x1080, OS is Win10, notebook in general is a Lenovo Y520.
Has anybody got an idea/ran into the same issue before?
Thanks in advance
105 Views · 5 Replies ( Last reply by Pavel )
tonite i was going to host for GPLF2 mod
got everything lined up (mod change in HOST setup etc) and pressed GO
the server shows the GPL splash... F2 splash....and then BRIEFLY the screen to connect .. the place where you'd enter the IP if you wanted to JOIN but then Back to Desktop (CTD)
i had similar issues testing the 66 and 71 canAm mods , the 65 mod and the 69mod
going back to the 67 mod, it was ok!
back to F2.. CTD
i just resorted to a new install of GPLF2.. but still got CTD - so now i'm at a loss
same result (CTD) if i try to go to Training or Single race - CTD on all but 67 and for some reason 65mod
AV is not a factor
i also tried deleting the mod specific exe's.. and letting GEM+ rebuild.
this one really has me and a couple other GPL'ers stumped.
who will come up with the solution?
159 Views · 11 Replies ( Last reply by Bob Simpson )
Recently installed, (had installed), a 500GB SSD drive and a GTX 1650 Super(4GB). Can now reboot Win10 in about maybe less than 30secs.
Everything is blinkblinkblink.
The pace is frantic.
But, have been messing with fps issues ever since.
Found it is possible to drive on-line at 4fps and continue on until whatever is hanging up figures it out and gets things back to routine fps, (35.xx/36), as long as the car is on a straight it is not catastrophic.
Otherwise it is a time warp nightmare because FFB and steering control checks out as well. No hope if caught in the wrong place.
Or it gets so bad there is no going on.
The issue just comes and goes with no apparent consistency or correlation to graphics or track position., on-line or not.
So far no amount of tweaking, (4GB patch, Win10/Nvidia/GPL settings) has had much if any effect.
As hardware gets faster and faster is it possible some GPL issues are caused by things happening too fast?
How can things be slowed a bit to test that?
Or is this just yet another early morning silly idea?
216 Views · 15 Replies ( Last reply by John Woods )
96 Views · 3 Replies ( Last reply by fajanko )
Currently he is in the Ferrari 312 66A (team_number = 9, team_order = 2 in the driv66.ini).
Lorenzo Bandini is in the Ferrari 312 66B (team_number = 9, team_order = 1 in the driv66.ini).
Both sets of graphics are in the cars/cars66/ferrari folder.
First Question: What parameter in the driv66.ini determines which Ferrari is assigned to the drivers?
Note: I tried making Parkes drive the Ferrari 312 66B by changing team_order = 1, but that did not change his car.
Next, I tried making Parkes drive the Ferrari 246 by changing team_number = 10.
The graphics for the 246 are in the cars/cars66/c11 folder.
That worked, but the car has no number (despite having the 22 skin in the c11 folder).
Second Question: Why doesn't the car display the number?
Thanks in advance for any insight you can provide!
83 Views · 2 Replies ( Last reply by kunc )
Pete Gaimari - Yesterday, 08:46 PM
Car Files And Car Numbers
kunc - Yesterday, 10:41 AM
Struggle With Screen
lalb2001 - Yesterday, 09:02 AM
John Woods - Yesterday, 07:24 AM
Server Ctd For 'some' Mods
Bo Bruce - Nov 23 2020 - 10:04 PM
Gpl 1968 Setups
Ronnie Nilsson - Nov 23 2020 - 04:23 PM
Discord Gplracer Channel
Stefan Roess - Nov 23 2020 - 10:52 AM
Learning to luv the deadzone
does anyone know how to get an validation mail?
Groundhog's GPL 2020 DEMO season kicks off this Friday!
Contemplating retirement with equanimityShow comments (1)
Back in training :P
Google, Bing, rcb, GrandPrixYannick , Pavel, Pete Gaimari, D_J, Ramoats, MLGathome, Pedro, JonnyA, paul skingley, Manfred Cubenoggin, Lee200, Arturo Pereira, Reco21